Posted on

5 things needed for Koi Pond that you need to know

Barebones Requirement for Koi Pond

Whatever you’re reason for wanting to start a Koi pond; you may find the range of options to be quite overwhelming. It is feasible to spend thousands and thousands of dollars on your Koi pond before even purchasing any fish! If you’re just starting, however, you may want to start with something a little more budget friendly to determine if Koi ponds are right for you. This guide will cover the absolute essentials of setting up your first Koi pond for just a few hundred dollars and some honest elbow grease. In the future, you may become a very successful Koi breeder, but for now let’s focus on setting up a functional pond that do well enough to keep your fish healthy and happy. After you get the pond in place, functioning, and stable enough to support the Koi fish you purchase—then, and only then, would you truly be ready to sink into the investment of purchasing the Koi fish themselves.

To begin, you will need the following five items:

1.) A Pond Liner – Simply put, a pond liner will hold the water in your pond. If you dig a hole in the ground and put water in it, it will be absorbed into the soil (unless you’re talking about a LOT of water). Furthermore, you want to separate you Koi’s environment from outside contaminants as much as possible. Consider either uPVC or Butyl; both are readily available from your local home improvement store. If your hole has lots of sharp rocks in it, you may want to purchase some extra layers or padding to protect the liner. Since the padding will not come in contact with the Koi, anything resistant to shredding will work, even an old rug.

2.) A Filter – You cannot have a Koi pond without a filter. Your filtration needs will depend on the volume of your pond, which means that if you want to save you should start will a smaller pond. Unless you are skilled in fabricating your own aquarium filters, you would be best served by purchasing a filter in the store. You need a filter to remove debris, bacteria, and toxins from the water. If you’re working on a budget, take a good look at the filter prices and their recommended replacement intervals making sure to factor that cost into your calculations.

3.) A koi pond aeration– This will work in conjunction with the filter to clean your pond water. It is absolutely essential to your Koi’s survival to have a working pump at all times. If you can afford it, you should always keep a backup pump on hand in case of a failure. Make sure to check with your aquarium supply dealer regarding pump efficiency. A general rule of thumb is that your pump should be able to circulate the entire pond’s volume within a couple of hours.

4.) A UV Clarifier – This is a special piece of equipment that fits between the pump and the filter. It uses UV rays to help the filter remove algae from the koi pond water. Algae are a special concern in Koi ponds since it is often too small to be caught by most filtration systems. The UV rays will cause algae particles to bond together so that they are large enough to be filtered out of the water. It is feasible to remove algae from the pond by chemical methods, but this is considered hazardous to the Koi.

5.) A Test Kit – Even experts need test kits. The quality of your Koi’s water must be checked frequently. One of the most dangerous chemicals to your Koi is ammonia, which can be detected by neither sight nor smell. You will need two different types of test kits, one for pH, and one for nitrate (which will indicate filter performance). Ensuring the quality of your Koi’s water is a major factor in how long they will survive.

 

Posted on

freshwater clams in ponds useful or dangerous to your koi pond?

freshwater clams in ponds do’s and don’ts

Freshwater clams are a good natural living filter media but it has a downside too. For example, its larvae will become a parasite to fish they will live on the fish gills and fins in addition if they became dead in your koi pond it will pollute your water.

Just unionid mussels attach to fish gills to complete their life cycle that is found in North America. There are other clams found in freshwater that does not require fish to attach to during the larval stage.

From my understanding, even the Unionid mussels would need to be very overpopulated in a pond to adversely affect the gills of fish located in the pond.

It would take a sizeable population of any freshwater bivalve to noticeably affect the water clarity on the typical garden pond. Notice the number of clams in the small aquarium in the video. Multiply this by the capacity (gallons) of your pond.
This is not to say that they would not be a welcome addition to the overall diversity of a pond.

If one is vigilant as to the source of these bivalves. They can harbor pathogenic organisms just as any fish or plant. Always utilize a reliable, responsible and established supplier. Sites such as Craig’s list and eBay should be avoided.

 

Posted on

My simple DIY airlift pump filter system that you need to know for the first time

This is my simple DIY filter system that I used in my breeding tank. I used mosquito net as filter media and old empty bottled water as filter housing.

There is an advantage in using airlift pump

  1. You will save electricity since you will no longer need to install aerator since air is used to lift the water.
  2. You will not be endangered by an electric shock from like using a submersible pump since submersible pump sometimes when broken already will ground in the water and cause to electrocute you and the koi fish.
  3. You no longer needed to install electrical wirings going to the koi pond since you can just run a garden hose to the airlift pump out from your window and the air pump that supplies air to the airlift pump can be installed inside your house.